|
A
quality meat cutter, don't be fooled by the price this is just as good as it
more expensive rivals.
- Robust alloy body
- Very strong
- Spare wire and plunger pads
- various sizes available
£28.50 |

|
|
 |
Malman Floats |
Malman floats are a company producing
quality floats which are suitable for all sorts of modern Match, Pleasure,
Commercial fishing. Below are details on some of there floats that are
currently available. Most of them are now made from a new
non-absorbent type of foam and are all available in all the commonly used
sizes.
Champers -
Made
from mt-foam. The ultimate F1 float, fine glass bristle and stem = mega
sensitive! The weight of a size 20 b911 will sink these from a fair bit of
bristle meaning the slightest movement of the bait will register well,
perfect for F1s when they just suck the bait and hold still. Not just for
F1s either, has been used to good effect as a squatt float by some of the
top team lads up north. Good for use on maggots, bloodworm and corn skins.
F1 Paste -
Made from MT-foam. Paste float designed for F1's and
smaller pastie carp. 1mm main bristle with a shorter thicker bristle at the
body for reading lifts. Shot to the base of the thick bristle and then use
the paste to pull it down so a small bit of the main bristle is showing. Hit
bites when the float is pulled under, the thicker section of bristle shows
or the tip 'rattles'.
Winter Wires -
MT-foam
construction, Fine wire stem with 1mm translucent hi-glow fibreglass tips.
Very stable and very sensitive float for winter carp fishing with maggot
that sits lovely in the water. Makes a good silvers float as well.
Thickos -
Made from MT-foam.
Super tough carp floats for bigger baits like pellet, meat and corn. Fibre
stem straight through the body and glued into hollow tips for strength with
spring eyes. A favourite for the margins.
Adams -
MT-foam construction. A no no-nonsense multipurpose carp float for use with
pellets and meat. Hollow tip with a ultra strong glass stem which gives good
stability. |